Nortrac 254 will not start
Vet103
Join Date: Sep 2016 Posts: 3 Missouri |
2016-09-24 195820
My tractor has been sitting idle for a week, it has never had a problem starting, and now it will not even make a click when I turn ignition. Nothing. I changed the battery since it was old and checked the fuses. Still nothing. Could this be the solenoid or the starter?
Reply to | Quote Reply | Add Photo
Nortrac 254 will not start
cowrider
Join Date: Apr 2012 Posts: 90 new york |
2016-09-26 195825
If you have a volt meter or a test light you can check at the starter that you have power there. Make Sure that it is out of gear and brakes applied/chocked. You should have power at the large terminal at all times, small terminal when switch is in start position. If nothing then check battery terminals and ground. Another check is to use a remote start switch or heaven forbid a screw driver from the battery terminal on the starter to the small terminal, this should engage the starter.
Do you have a manual? I found this one
http://www.jinma-tractor.com/download/JINMA20-30A.pdf
it has a wire diagram ....
Reply to | Quote Reply | Add Photo
Nortrac 254 will not start
aceme2
Join Date: Jun 2016 Posts: 7 MO |
2016-10-10 195862
I would have to agree with first post. if you have not voltage at small post with start button pushed check is you have a broke wire at your clutch safety switch. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This